Metso C Series Jaw Crusher Flywheel | Ductile Iron | OEM Spares – High-Performance Energy Storage for Metso/CAT/CITIC Crushers
Applicable Brands : Metso, CAT, CITIC + compatible aftermarket
Color: Vibrant Red (standard; custom colors available)
Material : High-Strength Cast Iron (GG25/GG30) with wear-resistant paint
Weight : 120–250kg (varies by crusher model)
Dimensions (Typical) : Diameter: Φ600–1000mm; Thickness: 80–150mm
Mounting: Flange + keyway design for secure shaft connection
库存 332 件
PRODUCT
Description
Red Jaw Crusher Flywheel: Inertia Drive for Metso C Series
The Jaw Crusher Flywheel is the kinetic energy reservoir for the Metso C Series and compatible single-toggle jaw crushers.
Engineered for heavy-duty inertia management, this massive balanced casting stores rotational energy during the idle stroke and releases it during the crushing stroke, smoothing out the torque demand on the drive motor.
For mining maintenance teams sourcing from crusher part suppliers, structural integrity is paramount.
A flywheel failure at 250 RPM is catastrophic.
Our flywheels are cast from high-grade Ductile Iron (Nodular Iron) to withstand the cyclic stress of crushing hard granite and basalt, offering a safer, longer-lasting alternative to standard grey iron spares.
Core Engineering Advantages
- Kinetic Energy Storage: Optimized mass distribution at the rim maximizes the moment of inertia ($I = mr^2$). This ensures the crusher can power through “peak load” events (oversized feed) without stalling the electric motor.
- Vibration Damping: Cast from EN-GJS-500-7 (GGG50), the graphite nodule structure effectively dampens the high-amplitude vibrations generated by the eccentric shaft, protecting the main frame bearings.
- Dynamic Balancing: Each flywheel is machined and balanced to ISO 1940 Grade G6.3.
This eliminates “wobble,” which is the primary cause of locking assembly failure and keyway fretting.
Technical Specifications & Material Standards
We adhere to strict foundry safety standards. Unlike generic crusher spares, our flywheels undergo ultrasonic testing to ensure zero internal voids.
| Parameter | Specification | Standard/Notes |
|---|---|---|
| Compatible Series | Metso C Series (C80 – C160) | OEM Interchangeable |
| Material Grade | Ductile Iron (Nodular Cast Iron) | ASTM A536 80-55-06 / EN-GJS-500-7 |
| Net Weight | 1,200 kg – 3,500 kg (Model Dependent) | Corrected from Source |
| Diameter | 1200mm – 2000mm | Machined Rim Face |
| Mounting Interface | Tapered Locking Assembly / Keyway | Interference Fit Ready |
| Balancing | Static & Dynamic Balanced | To prevent bearing fatigue |
| Surface Finish | Safety Red (Polyurethane) | High Visibility for Safety |
Performance & Safety Features
Upgrading to a precision-balanced flywheel offers measurable operational benefits:
- Bearing Life Extension: Unbalanced flywheels apply massive centrifugal loads to the main bearings. Our G6.3 balanced flywheels reduce this parasitic load, extending bearing service life by up to 25%.
- Energy Efficiency: By maintaining a consistent rotational momentum, the motor current draw is stabilized, reducing peak amperage spikes by 15-20% during operation.
- Safety Factor: Ductile iron has superior tensile strength (500 MPa) compared to Grey Iron (250 MPa), virtually eliminating the risk of the flywheel bursting due to centrifugal force or shock loads.
Field Diagnosis: Flywheel Health Check
While flywheels look static, they are dynamic components. Inspect for these issues:
- “Wobble” or Runout: Visually inspect the flywheel rim while running. Visible runout indicates a loose locking assembly or a bent eccentric shaft.
- Hub Cracks: Use dye penetrant on the hub area during liner changes. Cracks here are fatal; the flywheel must be replaced immediately.
- Fretting Dust: Red rust powder around the shaft/hub connection indicates movement. This means the friction coupling (locking assembly) has failed, and the shaft is being damaged.
Expert Engineer’s Note: Installation & Locking Assemblies
Critical Maintenance Advice: Installing a 2-ton flywheel requires strict adherence to safety protocols.
Most modern C-Series crushers use Keyless Locking Assemblies (friction shrink discs).
Do not use anti-seize or oil on the shaft contact surfaces unless specified! Friction is what holds the flywheel on.
Lubricating the wrong surfaces can cause the flywheel to slip and detach.
Torque the locking bolts in a star pattern and in multiple passes (50%, 75%, 100%).
Always verify the counterweight position relative to the eccentric throw to ensure the crusher is balanced.
“Authoritative Engineering Data: All critical metallurgical specifications and dimensional tolerances (e.g., ±0.05mm) are strictly governed by the master English documentation. While localized versions are provided for operational reference, the English original remains the sole binding authority for quality inspection and technical compliance.”





