HP3 Cone Crusher Head Centre N82404330
Head Diameter :1000 mm (39 inches)
Maximum Feed Opening :220 mm (8 3/4 inches)
Motor Power :250 kW (350 hp)
Crushing Application: Secondary, Tertiary, and Quaternary Crushing
库存 43 件
PRODUCT
Description
Metso Nordberg HP3 Cone Crusher Head Centre (Cone Head)
The Head Centre (also known as the Cone Head or Head Body) is the central structural casting of the Metso Nordberg HP3 cone crusher.
It is the critical interface that transmits the hydraulic power from the main shaft to the crushing liners.
Unlike the wear parts (Mantle) that cover it, the Head Centre is a permanent component engineered for high-cycle fatigue resistance.
As a specialized crusher parts supplier, we manufacture HP3 heads to strict OEM metallurgy standards, ensuring a precise interference fit that prevents catastrophic “head spin” events.
Core Engineering & Manufacturing Advantages
A failed Head Centre can destroy your socket liner and main shaft.
Our manufacturing process prioritizes structural rigidity and geometric precision.
- Structural Metallurgy: Cast from ASTM A148 Grade 90-60 Cast Steel (Not Manganese).
We employ a Vacuum Degassing process to eliminate internal porosity, ensuring the head withstands the 250kW crushing force without cracking under load. - Stress Relief Annealing: Every casting undergoes a full normalization cycle to relieve residual casting stresses.
This guarantees the head maintains its concentricity and interference fit tolerance over years of thermal cycling (operating at 40°C – 60°C oil temp). - Precision Spherical Seat: The underside bearing surface is CNC ground to a mirror finish (Ra 0.8µm) and inspected for 100% contact.
This precision is vital for maintaining the hydrodynamic oil wedge that separates the head from the socket liner.
Technical Specifications
The following table outlines the engineering parameters for our HP3 replacement heads, ensuring full compatibility with OEM assemblies.
| Technical Parameter | Specification Details |
|---|---|
| Compatible Model | Metso Nordberg HP3 (New Generation) |
| Component Name | Head Centre / Head Body |
| Material Standard | ASTM A148 Gr 90-60 / DIN GS-20Mn5 (Cast Steel) |
| Hardness | 220 – 260 HB (Optimized for Toughness) |
| Weight (Approx) | ~950 kg – 1,050 kg |
| Spherical Tolerance | 0.02mm Concentricity |
| Mounting Type | Interference Fit (Thermal Assembly) |
Performance & Maintenance Diagnosis
To maximize the life of your crusher spares, regular inspection of the Head Centre is required during every liner change.
- Spherical Seat Inspection: Check the bottom spherical surface for scoring or “blueing” (heat discoloration).
This indicates lubrication failure or a worn socket liner.
Tip: Always use Prussian Blue paste to check the contact pattern against the socket liner; it should show >80% contact. - Mantle Seating Area: Inspect the conical surface for “fretting” or steps.
If the mantle has been moving on the head, it will wear a groove into the steel.
If wear exceeds 1-2mm, the head must be re-welded and machined to prevent new mantles from cracking. - Bore Condition: The internal bore must be free of vertical score marks.
Scoring suggests the head has spun on the main shaft, destroying the interference fit.
Expert Installation Note
Thermal Expansion Required: The HP3 Head Centre is installed via an interference fit.
You must uniformly heat the head (using an oil bath or induction heater) to approximately 80°C – 100°C above ambient temperature to expand the bore before dropping it onto the main shaft.
Never use a sledgehammer to force the head down, as this will damage the precision shaft surface and lead to operational failure.
Protect your crusher’s core integrity.
Contact our engineering team today to verify stock availability for the Metso HP3 Head Centre.
“Authoritative Engineering Data: All critical metallurgical specifications and dimensional tolerances (e.g., ±0.05mm) are strictly governed by the master English documentation. While localized versions are provided for operational reference, the English original remains the sole binding authority for quality inspection and technical compliance.”






